Why does ash wood need to be rubbed?

There is a difference between the pattern and the ruled pattern of the ash, which is similar to the grain texture of the arborvitae and the eucalyptus. The color of the ash will achieve unexpected effects. If the material is good, the worker's craft level is high, and the ash will mimic the white pheasant. Red maple, maple, teak, cherry, walnut, rosewood, rosewood, etc., especially when imitating dark wood species, its color is heavy and heavy, which can add a historical and cultural atmosphere to the living room.

Rubbing paint process - rubbing paint advantage:
The use of rubbing paints will achieve unexpected results. If the materials are selected well, the craftsmanship of the workers will be high. The willow can imitate the white peony, red peony, maple, teak, cherry, walnut, rosewood, rosewood, etc. When imitating dark wood species, its color is heavy and heavy, which can add a historical and cultural atmosphere to the living room.
Rubbing paint process - rubbing paint process:
1, repair paint process:
1 use sandpaper to polish off the pencil marks and other dirty  left by the woodworking on the panel; 
2 to make the first painting, to play a sealing role, and to prevent the iron nails from rusting; 
3 Dust-repairing nail holes and seams , Note that the color should be same with the panel color 
4 polished; 
5 painting
6 polished; 
7 spray color transparent paint; 
8 transparent painting, protect the color, increase the feel.
Attention: 
1 The best effect of paint spraying; 
2 Master paint viscosity, adjustable thinning, more than a few times to ensure that the color is accurate and uniform, once sprayed on the technical requirements are quite high, the color is also Not very good to grasp; 
3 the same panel, the same paint, but the more times the spray will be the deeper the color, the less the spray again on the color lighter; 
4 color paint color is related with wood panel, the same color paint , The same construction, but the final result is different when sprayed on different wood panels
5 Some panels have their own shadows, there are differences in shades of color, after the finish paint will feel the badly, the color is not uniform, but this is not necessarily Construction caused; 
6When the panel is bought back, brush the primer to protect the board.

2, Rubbing the paint process:
Rubbing paint is actually a kind of varnish. It can change the color of the panel without covering the wood grain of the panel. It is a kind of high-grade construction process, and the painter's working cost is also much more expensive than the ordinary work cost.
The classification of the rubbing paint: the previous repair paint process is: use water color fine directly on the panel and color correction. Brush varnish again. current process is more complicted: it is the bottom of the color, surface and then spray color, then spray varnish protection.
3, process methods:
Bottom color correction (ensure that the lines of wood grain are prominent, and make the color of the wood line close to the panel) - Brush the primer (increase the thickness of the paint, make the paint plump) - Spray paint (to achieve the specified color) - Finally spray the varnish twice (the protective paint does not fade).
Matters needing attention: Before doing the paint, we must paint some sample first, let customer choose one best color, and then paint the bulk bathroom furniture. For color differece problems, let the painter spray a few places to see its craft.